Post Page Advertisement [Top]

L.P gas Multi Cylinder Installations

Saraswat Group has extensive experience in LPG / propane multi cylinder gas installations we have been in this business for last 12 years.  We have a team of  experienced  engineers who handle the gas systems properly. The Safety is highly concern in LPG/Propane Installations because it’s a highly inflammable gas with high density. Bearing high density its spreading at ground level up to there is the  mixing of air to lean the LPG / propane to escape the same . In these  circumstances it is advisable  All Liquid Propane / LP Gas Facilities shall be in outdoor  readily accessible for inspection, reading, testing, and shutting off the gas supply at all times. All service piping and main supply shut-off valves shall be outside the building. All propane and L.P Gas applications requires two or three stage  pressure regulation is recommended. Because pressures in lpg/ propane  cylinders  can fluctuate significantly proportionately to temperature and withdrawl rates of gas , gas trains  must be present to deliver a steady flow and  pressure to downstream Gas equipments.  Multi cylinder installations is advisable for  up to 300 Kg/hr of peak load and 2000 kg/day average consumption .

LPG / Propane Tank Installation

In today’s modern scenario LPG (Liquefied Petroleum Gas) is the most easily available and economical / cheapest  Fuel for all heating applications of various industries i.e Forging Units, Backing and drying, Crispy Biscuits Confectionery, Dal mill, Paint drying, Hotel Industry, Ceramic industry, textile Industry, Hot mix /  asphalt plants, Melting of Metals and many more. LPG has a better Calorific  value in comparison to LDO, HSD,  FO, LSHS, C9  etc conventional fuels.  Attempting to install your own propane tank is not advisable under any circumstance. Nor is it legal. Bulk LPG Installation can be Designed, Supplied, and Installed and Commissioned on turnkey Basis In Accordance to Explosive Norms/Local Statutory Requirements.

Commercial Gas Installations

We are engaged in installation of Reticulated domestic and commercial projects .  the features are:
24 hours gas supply at your command.
• No cylinder in the kitchen or inside the flat / resturants.
• No holiday for Gas supply.
• No follow up with LPG Distributor.
• No waiting list for new connection or refill.
• No entry to delivery boy inside the house.
• No handling of cylinders by elders or younger generation.
• LPG cylinder are handled by  trained mechanic.
• Gas meter for recording on actual consumption.
• 3rd party accident and loss of property insurance.
• Entire system is as per IS code  6044 Part I  and OISD -162.

We offer reticulated systems for domestic and commercial locations with Over Pressure and Under pressure protections for reduce mishapnings

Gas pipeline contractors

It’s really great pleasure to introducing our self Saraswat Group as a total technical solution company of long standing with an impeccable reputation manufacturing and doing Installation of LPG gas pipeline contractor in Industries, Hospitals, Hotels, Fast Food Outlets, Restaurants, Mess, Hostels, Canteens, Motels, Banquets and for places of Worship with complete range of all kinds of gas spare parts and pipeline fitting accessories.  Customer satisfaction is our first priority.

Combustion Control Product
As we are engaged in trading and installation  of combustion equipments/ products, we are well equipped with safety equipment and devices in order to protect our workers and our clients from any fatal accidents. We are engaged in offering a broad array of Combustion Control Products to our clients. Saraswat Group deals in many Combustion Control Product such as..

  • Air / Gas Ratio Regulator
  • High / Low  Pressure Gas Regulator
  • Under Pressure shut-off Valve
  • Zero Gas Governors
  • Burner Controllers
  • L.P gas / CNG Gas  detectors
  • Slam Shut off / Over Pressure shut- off valve
  •  Pressure Relief valves
  • Oil and Gas Flow Meters
  • Customized and Pre piped Gas Train
  • Excess flow check valve
  • Safety Relief Valve
  • Ball Valves
  • L.P Gas Fittings and Accessories
  • Flexible High Pressure Hose
  • Flexible LP Pigtails
  • Thermal Relief valve
  • Multi Lock Cylinder Adapter, and  many more

Air Gas Ratio regulator
Air Gas Ratio regulators allow precise, repeatable control of gas/air ratios on preheated air combustion systems where air density is affected by temperature changes. They can be used as direct gas pressure controllers or as loading signal generators for conventional gas/air ratio regulators. They are also suitable for cold air combustion systems where the available gas pressure is higher than the combustion air pressure, avoiding the necessity of troublesome, high maintenance bleeders. They are suitable for natural, LP, and clean coke oven or bio-gas. Special models are available for controlling air pressure.

High / Low Pressure Regulators

A pressure regulator is a valve that automatically cuts off the flow of a liquid or gas at a certain pressure. Regulators are used to allow high-pressure fluid supply lines or tanks to be reduced to safe and/or usable pressures for various applications. Gas pressure regulators are used to regulate the gas pressure and are not appropriate for measuring flow rates. Flow meters, Rota meters or Mass Flow Controllers should be used to accurately regulate gas flow rates. A pressure regulator's primary function is to match the flow of gas through the regulator to the demand for gas placed upon the system. If the load flow decreases, then the regulator flow must decrease also. If the load flow increases, then the regulator flow must increase in order to keep the controlled pressure from decreasing due to a shortage of gas in the pressure system. These regulators are available in preset type, adjustable type in different flow ranges.

Under Pressure shut-off Valve
This control device is not similar to a low pressure cut-off device and in effect, Performs the same task. its mode of operation is slightly  different , however, and it is Invariably incorporated with a second stage regulator. Its used in LPG/ CNG Installations. When the device senses an abnormally low pressure ( slightly lower ) than Operating pressure it causes diaphragm to drop a particularly low position resulting in The UPSO valve closing against its seating, gas cannot therefore pass into the control Valve until the reset rod has been lifted to reset the UPSO valve. This can only be Achieved when all appliances controls are closed and pressure can build up  in  the Downstream pipe line. Using of this type of safety device control low pressure situation In appliances and in minor leakages in down stream.

Zero Gas Governors

This is same as a regulator but act different. These type of regulator is used where no any fluctuation/ variation required in pressure for appliances. These governors are used to control gas and air inlet pressure for gas burners and appliances in industry and for heating purposes,  Spring loaded gas governor with inlet pressure compensation and zero shut-off. The outlet pressure is kept constant with changing gas flow as a function of the spring setting. The inlet pressure compensation makes for high control accuracy with changing inlet pressures. The zero shut-off prevents the outlet pressure from increasing when there is no gas flow through the governors. These governors are available in deferent sizes as per specific pressure and flow requirements.

Burner Controllers     

These types of instruments are used to control the gas and oil burners.  It’s a Electronic device heaving sequence of process of Ignition and modulation with Temperature of appliances. These act in sequence  of ignition ie first the air Supply is on than sparking for ignition is on after that the fuel supply is on and Burner is ignite if there  is  any delay or flame failure in burner the fuel supply Get shut- off. It safe the disasters which happens in appliances by excess storage  Of fuel inside the appliances.

L.P gas / CNG Gas  Detection Systems

A gas detector is a device which detects the presence of various gases within an area, usually as part of a safety system. This type of equipment is used to detect a gas leak and interface with a control system so a process can be automatically shut down. A gas detector can also sound an alarm to operators in the area where the leak is occurring, giving them the opportunity to leave the area. This type of device is important because there are many gases that can be harmful to organic life, such as humans or animals.
Gas detectors can be used to detect combustible, flammable and toxic gases, and oxygen depletion. This type of device is used widely in industry and can be found in a variety of locations such as on oil rigs, to monitor manufacture process.

1 comment:

  1. Now if the Casinos get 3%, you because the participant ought to get a return of 97%, which might vary depending on the machine’s paytable. However, if you’d prefer to know how to to|tips on how to} play 클레오카지노 higher with a useful video poker strategy - proceed studying. This game does not offer actual money gambling or a possibility to win or lose actual money. It is performed with a standard deck, and one joker is are included as wild card.


Bottom Ad [Post Page]